Adorcam

Adorcam is a free mobile app for remote monitoring with P2P IP security cameras. It provides live video streaming with H.264 compression, motion detection alerts, event snapshots, two-way audio, and video sharing. You connect to your camera by entering its ID and password — no complex network setup required.

To connect your Adorcam camera to Wi-Fi: 1) Download the Adorcam app from the App Store or Google Play. 2) Power on your camera and place it near your Wi-Fi router. 3) Open the app and tap 'Add Camera'. 4) Scan the QR code on your camera or enter the camera ID manually. 5) Follow the on-screen Wi-Fi configuration steps. Make sure your router uses 2.4GHz Wi-Fi, as most P2P cameras don't support 5GHz.

Common reasons for Adorcam Wi-Fi connection issues: your router may be using 5GHz (switch to 2.4GHz), the Wi-Fi password may be incorrect, the camera may be too far from the router, or there may be interference. Try: restarting the camera and router, moving the camera closer to the router, verifying the Wi-Fi password, and ensuring your network allows P2P connections.

Adorcam works with P2P IP cameras that use the XM/Xiongmai platform, including many cameras sold under brands like ESCAM, Alkivision, and various unbranded P2P cameras on Amazon. Check if your camera's documentation mentions Adorcam compatibility or look for the Adorcam QR code on the camera body.

Error 502 (Bad Gateway) in Adorcam typically indicates a server-side issue. This can happen during server maintenance or high traffic periods. Try: waiting a few minutes and retrying, checking your internet connection, restarting the app, or clearing the app cache. If the error persists, the Adorcam servers may be experiencing downtime — check back later or contact support at [email protected].

If Adorcam is not recording events: check that motion detection is enabled in camera settings, verify the sensitivity level is appropriate, ensure the camera has a working SD card with available storage, check that push notifications are allowed in your phone settings, and confirm the camera is online and connected to Wi-Fi.

Adorcam does not have an official dedicated desktop application for Windows or Mac. The app is designed for iOS and Android mobile devices. To view cameras on a PC, some users utilize Android emulators, but this is not officially supported. The iOS version may work on Macs with Apple silicon through macOS compatibility.

To reset an Adorcam camera: locate the reset button on your camera (usually a small pinhole on the back or bottom). Press and hold the reset button for 10-15 seconds using a paperclip or pin until you hear a beep or see the indicator light change. After reset, the camera will return to factory settings and you'll need to set it up again in the Adorcam app.

Adorcam does not currently have documented official integration with Amazon Alexa or Google Home. The app focuses on direct P2P camera monitoring through the mobile app. For smart home voice control, check your specific camera model's documentation to see if it supports any third-party integrations.

Yes, Adorcam is completely free to download and use on both iOS and Android. There are no in-app purchases or subscription fees. All features including live view, motion alerts, two-way audio, and video sharing are available at no cost. Video storage relies on the camera's local SD card rather than paid cloud services.