IPC Geek

Aperçu des scores

4.4

Note globale

4.5

App Store

4.3

Google Play

100K+Téléchargements Google Play

i-Cam+

Name: i-Cam+
Rating: 4.4

UBIA Inc.Freemium

i-Cam+ — application gratuite pour caméras de sécurité basse consommation, sonnettes Wi-Fi, caméras 4G et solaires. Vidéo HD en direct (720p/1080p), reconnaissance faciale IA, audio bidirectionnel, stockage cloud et TF. 100K+ téléchargements.

Visiter le site App Store Google Play

Captures d'écran

Fonctionnalités clés

Streaming vidéo HD en direct — regardez des flux H.264 720p/1080p à 30 FPS depuis toutes vos caméras

Mode économie d'énergie — technologie veille/réveil intelligente pour prolonger l'autonomie des caméras sans fil et solaires

Réveil à distance — réveillez instantanément les caméras en veille depuis n'importe où

Alertes reconnaissance faciale IA — notifications intelligentes lors de la détection de visages connus ou inconnus

Notifications push avec capture — alertes instantanées avec images lors de détection de mouvement

Enregistrement local carte TF — stockez les vidéos localement sur carte microSD sans abonnement

Enregistrement et stockage cloud — plans cloud optionnels 7 jours ou 30 jours avec tarification flexible

Audio bidirectionnel full-duplex — communication claire en temps réel via caméras et sonnettes

Gestion multi-appareils — connectez et gérez caméras, sonnettes et capteurs depuis un tableau de bord unique

Support sonnette Wi-Fi — recevez les alertes de sonnette et répondez aux visiteurs à distance

Support caméra 4G sans fil — connectez des caméras 4G/LTE dans les zones sans Wi-Fi

Compatibilité caméra solaire — optimisé pour les caméras solaires avec gestion intelligente de l'énergie

Support caméra panoramique — visualisez des flux panoramiques 360° depuis les caméras grand angle

Paramètres à distance — ajustez la sensibilité, résolution, horaires d'enregistrement et préférences d'alerte

Consultation et lecture des alertes à distance — parcourez et relisez les enregistrements d'alerte depuis l'app

Expérience sans publicité — interface propre et sans pub dédiée à la surveillance

Introduction

Si vous recherchez une application de caméra à batterie conçue pour les appareils de sécurité intelligents basse consommation, i-Cam+ est l'un des meilleurs choix disponibles. Développée par UBIA Inc., i-Cam+ est spécialement conçue pour gérer les sonnettes Wi-Fi, caméras à batterie Wi-Fi, caméras 4G sans fil, caméras solaires et caméras panoramiques — le tout dans une interface mobile propre et sans publicité.

Avec une note de 4,5 étoiles sur l'App Store et 4,3 étoiles sur Google Play (100K+ téléchargements), i-Cam+ a gagné la confiance d'une communauté mondiale croissante.

Fonctionnalités clés : streaming vidéo HD en direct (H.264, 720p/1080p, 30 FPS), mode économie d'énergie avec réveil à distance, reconnaissance faciale IA, audio bidirectionnel full-duplex, stockage carte TF et cloud optionnel (7 jours à partir de 1,99 $/mois), support 4G/LTE et caméras solaires, 15 langues supportées, zéro publicité.

Spécifications techniques

App Namei-Cam+

Package Name (Android)cn.ubia.icamplus

Bundle ID (iOS)com.ubia.icamplus (seller: wei wei Fang)

Current Version1.1.89

App Size (iOS)138.5 MB

Minimum iOS11.0

Minimum Android5.0

Video ResolutionH.264, 720p/1080p, up to 30 FPS

Storage OptionsTF card (local) and optional cloud storage

AudioFull-duplex two-way audio

ConnectivityWi-Fi, 4G/LTE

Cloud Storage Plans7-day from $1.99/mo | 30-day from $3.99/mo | Annual plans available

DeveloperUBIA Inc. (Maxwell Wang)

Support Contact[email protected]

Tutoriels vidéo

FAQ

What is i-Cam+ and what does it do?

i-Cam+ is a free mobile app developed by UBIA Inc. for managing low-power intelligent video security devices. It supports Wi-Fi doorbells, Wi-Fi battery cameras, 4G wireless cameras, solar-powered cameras, and panoramic cameras. Key features include live HD video streaming (720p/1080p at 30 FPS), AI face recognition, two-way audio, power-saving mode with remote wakeup, TF card and cloud recording, and remote device management. Available on iOS and Android with 100K+ Google Play downloads.

How do I set up a camera with the i-Cam+ app?

Download i-Cam+ from the App Store or Google Play and create an account. Tap the add button to begin device pairing. Put your camera into pairing mode (usually by holding the reset button). Follow the in-app wizard to connect your camera to your Wi-Fi network. The app supports both Wi-Fi and 4G cameras. For Wi-Fi cameras, ensure you're connected to a 2.4GHz network during setup, as some cameras don't support 5GHz. Setup typically takes under 5 minutes.

What devices are compatible with i-Cam+?

i-Cam+ supports: Wi-Fi battery cameras, Wi-Fi video doorbells, 4G wireless battery cameras, Solar Wi-Fi and 4G wireless cameras, and Panoramic (360°) cameras. The app is part of the UBIA ecosystem, which also includes related apps like UBox, ucon, UBoxPro, Xega, and XegaPro for different device lines.

How much does i-Cam+ cloud storage cost?

Cloud storage is optional. Plans include: 7-day cloud storage (1 device) at $1.99/month, 30-day cloud storage (1 device) at $3.99/month, 7-day annual (1 device) at $20.49/year, 30-day annual (1 device) at $38.99/year. Multi-device plans are also available: 30-day (2 devices) $6.99/month, 30-day (3 devices) $10.49/month. Core features like live viewing work without any subscription.

Does i-Cam+ collect my personal data?

According to Google Play's data safety section, i-Cam+ does not share data with third parties. The app may collect app info and performance data. All data is encrypted in transit, and you can request data deletion. The privacy policy is available at doc.ubianet.com.

Can I use i-Cam+ on multiple devices simultaneously?

Currently, i-Cam+ only supports being logged in on one device at a time. Logging in on a second device will log out the first. This is a known limitation that users have reported. If you need multi-device access, check with UBIA support for updates.

How does the power-saving mode work?

i-Cam+ is specifically designed for low-power devices. Cameras enter a sleep/standby mode to conserve battery. When motion is detected or you want to check in, the remote wakeup feature instantly activates the camera. This is especially important for battery-powered and solar cameras, where extending battery life between charges is critical.

What video quality does i-Cam+ support?

i-Cam+ supports H.264 live streaming at 720p and 1080p resolution, with frame rates up to 30 FPS. The app also supports snapshot capture and video playback of recorded alerts. Users consistently praise the video clarity and real-time performance with minimal lag.

My camera keeps disconnecting. What should I do?

Check your Wi-Fi signal strength near the camera. Ensure the camera firmware is up to date. Verify your router is broadcasting on 2.4GHz (many cameras don't support 5GHz). Try restarting both the camera and router. If using a solar camera, check that the solar panel is getting enough sunlight to keep the battery charged. For persistent issues, contact [email protected].

Can I use i-Cam+ without a cloud subscription?

Yes. The app's core features are free: live HD streaming, push notifications, AI face recognition alerts, two-way audio, remote wakeup, and device management. You can store recordings locally on a TF/microSD card without any subscription. Cloud storage is only needed if you want cloud-based recording backup.

Avis des utilisateurs

Itradestocks

App Store

Not like many other apps that keep pumping ads. As a security device it is bad that you have to scroll through ads and decline offers for cloud service before you can check on a possible security issue. This app allows you to see your cameras instantly. Keep up the good work!

Water-A

App Store

Camera quality is awesome, setup was easy, and WIFI was strong enough to catch it in the back yard. Good deal overall for the price.

Jeypate

App Store

Outstanding picture quality. I use these cameras at my ranch in a very remote location with consistent service. Very reliable and easy to manage.

BadMojo_OH

App Store

Works well for monitoring. Landscape view was broken after an iOS update but otherwise solid. Would be nice to have the ability to delete video files from within the app.

Fb queen

App Store

Video quality is very good. Setup was straightforward. My main issue is that the bird identification feature doesn't seem to work. Cannot find option to enable this. The live view and recording functions work fine though.

Michael Shannon

Google Play

Connected to a bird feeder and the video quality is excellent. Good AI bird recognition. Easy to use and change settings.

Nelson Nwachukwu

Google Play

Very good and efficient both to setup and during usage.

Syed Nasir Zaidi

Google Play

A good app. Gives all the access to camera without annoying ads.

Tiisetso Laka

Google Play

It's a great app with HD but I'd like to extend the time to record once an alert kicks in, not to be only limited to 30 seconds or full time record. But again it's a great app.

bryan K

Google Play

Purchased wireless camera v3. Setup was fairly easy. You see the camera view and all key functions right there on the screen. I use an SD card, only tricky thing I found in the app is that it has cloud storage on default. Just gotta hit that icon on the bottom right and it switches to SD card view. Overall, I found it fairly simple.

Journal des modifications

v1.1.89 — 18 sept. 2025

Optimisation de la logique de paiement cloud, support de nouveaux types d'appareils, optimisation de l'abonnement data.

v1.1.88 — 16 juil. 2025

Optimisation de la logique d'achat de services.

v1.1.87 — 1er juil. 2025

Correction de problèmes d'affichage, optimisation de l'achat de services.

v1.1.86 — 11 mars 2025

Ajout du support de la langue persane, correction de problèmes d'affichage.

v1.1.85 — 23 déc. 2024

Correction de problèmes de configuration d'appareils.

Retour

Visiter le site

Liens de téléchargement

App Store Google Play

Informations

FabricantUBIA Inc.

Site webi-cam.net

TarificationFreemium

Informations tarifairesTéléchargement gratuit. Cloud optionnel : 7 jours (1 appareil) 1,99 $/mois, 30 jours (1 appareil) 3,99 $/mois. Annuel : 7 jours 20,49 $/an, 30 jours 38,99 $/an. Plans multi-appareils disponibles. Renouvellement automatique.

Google Play

4.3

App Store

4.5

Note globale

4.4

Téléchargements Google Play100K+

Version1.1.89

Taille138.5 MB

Dernière mise à jour2025/09/18

Classification par âge4+

Appareils pris en chargeWi-Fi doorbells, Wi-Fi battery cameras, 4G wireless battery cameras, Solar Wi-Fi/4G wireless cameras, Panoramic cameras

Langues prises en chargeAnglais, arabe, français, allemand, hébreu, italien, japonais, coréen, persan, polonais, russe, chinois simplifié, espagnol, chinois traditionnel, turc (15 langues)

CompatibilitéiOS 11.0+, iPadOS 11.0+, macOS 11.0+ (Apple M1+), visionOS 1.0+, Android 5.0+

Date de publication2026/03/30

E-mail de support Politique de confidentialité Manuel d'utilisation

Catégories

Caméra de sécurité

Étiquettes

i-Cam+

Plus de Caméras

EasyViewer Pro

Caméra de sécurité

EasyViewer Pro est une application de vidéosurveillance mobile gratuite pour caméras IP, NVR, DVR et encodeurs vidéo — vue en direct HD 1/4/9/16 écrans, lecture vidéo à distance, contrôle PTZ, audio bidirectionnel, interphone vidéo, alertes de détection de mouvement, correction fisheye et stockage cloud.

No Brand

RXView Pro

Caméra de sécurité

RXView Pro est une application de vidéosurveillance cloud gratuite pour DVR, NVR et caméras IP — vue en direct HD, lecture vidéo à distance, contrôle PTZ, audio bidirectionnel, recherche faciale IA, détection de mouvement et humaine, panorama 360° et stockage cloud.

No Brand

SmartCam View

Caméra de sécurité

SmartCam View est une application gratuite de caméra de sécurité par ZhangHao — vue en direct multi-caméras, interphone bidirectionnel, alertes de mouvement, contrôle PTZ avec panorama 360°, support NVR 16 canaux, configuration par QR code et stockage cloud pour caméras IP, sonnettes et systèmes PoE sur iOS et Android.